Overview
Overview
Mobility 02 adds a proper external Wi-Fi antenna to a Peplink or Pepwave router, giving the built-in access point far better coverage around a vehicle, site cabin or outdoor installation than the router’s own antennas can manage from inside a metal enclosure.
Two dual-band elements cover 2.4 GHz and 5 GHz Wi-Fi for 2×2 MIMO, with up to 7.3 dBi peak gain in the 5 GHz band. The puck-style radome is UV-stable PC+ABS, IP68 rated and survives winds of up to 220 km/h, so it can be panel, wall or pole mounted using the supplied hardware.
Key highlights
- 2×2 MIMO dual-band Wi-Fi (2.4 GHz & 5 GHz)
- Up to 6.2 dBi at 2.4 GHz and 7.3 dBi at 5 GHz
- IP68 rated, UV-stable PC+ABS radome
- Operates from -40°C to 80°C
- Wind survival up to 220 km/h
- Panel, wall or pole mounting
- Low-loss CFD-200 cable with QMA connectors
- White finish to suit the vehicle or building
Recommended for
- Vehicle Wi-Fi — Extends a mobile router’s Wi-Fi hotspot to passengers and crew around buses, coaches and emergency vehicles.
- Rail & marine — Puts the access point antenna outside the metal enclosure where it can reach the whole carriage or deck.
- Outdoor kiosks & signage — Weatherproof external Wi-Fi for enclosures that would otherwise block the signal.
- Site cabins & temporary sites — Wall or pole mount to cover a yard or compound from the router inside.
Performance
Antenna performance
Two dual-band Wi-Fi elements deliver 2×2 MIMO across both the 2.4 GHz and 5 GHz bands, with higher gain at 5 GHz where most modern clients connect.
Elements
| Wi-Fi | 2x dual-band |
RF
| Frequency | 2400–2500 MHz & 4900–6000 MHz |
| Peak gain | 6.2 dBi (2.4 GHz), 7.3 dBi (5 GHz) |
| VSWR | < 2.0 |
| Polarisation | Linear |
| Impedance | 50 Ω |
| Feed power handling | 10 W |
Features
Wi-Fi
- 2×2 MIMO
- Dual-band 2.4 GHz & 5 GHz
- Linear polarisation
Build
- IP68 rated
- UV-stable PC+ABS radome
- 220 km/h wind survival
- Salt spray tested to MIL-STD 810F
Installation
- Panel, wall or pole mount
- 43 mm mounting hole
- Double-sided 3M adhesive pad included
Certifications
Hardware
Physical
| Height | 36 mm (spigot not included) |
| Diameter | 130 mm |
| Radome | UV-stable PC+ABS |
| Colour | White |
Cabling
| Connector | QMA |
| Cable length | 1 ft / 0.3 m |
| Cable type | CFD-200 |
Environmental
| Ingress protection | IP68 |
| Operating temperature | -40°C to 80°C |
| Storage temperature | -40°C to 80°C |
| Wind survival | 220 km/h |
| Salt spray | MIL-STD 810F |
Mounting
| Mounting | Panel, wall or pole |
| Mounting hole | 43 mm |
| Max panel thickness | 15 mm |
Package Content
Mobility 02 antenna, mounting bracket, wall/pole mount hardware, double-sided 3M adhesive pad
Documentation
Downloads & resources
Download the Peplink Mobility 02 datasheet covering full specifications and ordering codes.
