Overview
Overview
Mobility 22G covers everything a single-modem mobile router needs from one roof penetration: two wideband cellular elements for LTE B1–B86 and 5G n1–n99, two dual-band Wi-Fi elements for the router’s hotspot, and an active GPS element for tracking.
The UV-stable PC+ABS radome is IP68 rated, salt-spray tested and survives winds of up to 220 km/h. No ground plane is required, and it can be panel, wall or pole mounted using the supplied bracket and hardware.
Key highlights
- 5-in-1: 2x LTE/5G, 2x Wi-Fi, 1x GPS
- Covers 617–6000 MHz: LTE B1–B86 and 5G n1–n99
- Up to 6.0 dBi cellular and 7.4 dBi Wi-Fi peak gain
- Active GPS with 28 dB LNA
- IP68 rated, UV-stable PC+ABS radome
- No ground plane required
- Wind survival up to 220 km/h
- Panel, wall or pole mounting
Recommended for
- Emergency services vehicles — One roof antenna for 5G connectivity, in-vehicle Wi-Fi and GPS tracking.
- Buses & coaches — Feeds both the cellular uplink and the passenger Wi-Fi hotspot from a single puck.
- Field service fleets — Keeps vans connected and tracked with a tidy single-hole install.
- Marine & leisure — IP68, salt-spray-tested build for boats needing cellular, Wi-Fi and GPS.
Performance
Antenna performance
Separate cellular, Wi-Fi and GPS elements in one housing give a single-modem router full 2×2 MIMO on both cellular and Wi-Fi, plus active GPS.
Elements
| Cellular | 2x LTE/5G |
| Wi-Fi | 2x dual-band |
| GPS | 1x (active) |
Cellular RF
| Frequency | 617–6000 MHz |
| Bands | LTE bands B1 to B86 (except B31, B72, B73, B87, B88), 5G bands n1 to n99 |
| Peak gain | 1.2 dBi (617–960 MHz), 5.7 dBi (1710–2700 MHz), 5.6 dBi (3400–4200 MHz), 6.0 dBi (5000–6000 MHz) |
| VSWR | < 2.5 over 85% of the band |
| Polarisation | Linear |
| Impedance | 50 Ω |
| Feed power handling | 10 W |
Wi-Fi RF
| Frequency | 2400–2500 MHz & 5000–6000 MHz |
| Peak gain | 4.8 dBi (2.4 GHz), 7.4 dBi (5 GHz) |
| VSWR | < 2.5 |
| Polarisation | Linear |
| Impedance | 50 Ω |
GPS
| Frequency | 1561–1602 MHz |
| Peak gain | 0.5 dBi @ 1575 MHz, 1.6 dBi @ 1602 MHz |
| LNA gain | 28 ±3 dB |
| Noise figure | 1.5 dB max at 3.3 V |
| Operating voltage | 3.3 V |
Features
Cellular
- 2×2 MIMO LTE/5G
- LTE B1–B86, 5G n1–n99
- Ground plane not required
Wi-Fi
- 2×2 MIMO
- Dual-band 2.4 GHz & 5 GHz
GPS
- Active GPS element
- 28 dB LNA gain
Build
- IP68 rated
- UV-stable PC+ABS radome
- 220 km/h wind survival
- Salt spray tested to MIL-STD 810F
Certifications
Hardware
Physical
| Height | 36 mm (spigot not included) |
| Diameter | 130 mm |
| Radome | UV-stable PC+ABS |
| Colour | White |
Cabling
| Connector | SMA/RP-SMA |
| Cable length | 6.5 ft / 2 m |
| Cellular & Wi-Fi cable | CFD-200 |
| GPS cable | RG-174 |
Environmental
| Ingress protection | IP68 |
| Operating temperature | -40°C to 80°C |
| Storage temperature | -40°C to 80°C |
| Wind survival | 220 km/h |
| Salt spray | MIL-STD 810F |
Mounting
| Mounting | Panel, wall or pole |
| Mounting hole | 43 mm |
| Max panel thickness | 15 mm |
Package Content
Mobility 22G antenna, mounting bracket, wall/pole mount hardware, double-sided 3M adhesive pad
Documentation
Downloads & resources
Download the Peplink Mobility 22G datasheet covering full specifications and ordering codes.
