Overview
Overview
Mobility 20G gives a single-modem cellular router a proper roof-mounted antenna, with two wideband elements covering LTE bands B1 to B86 and 5G bands n1 to n99 from 617 MHz to 6 GHz, plus an active GPS element for location tracking.
The low-profile radome is IP68 rated, UV-stable and survives winds of up to 220 km/h. No ground plane is needed, so it can be panel, wall or pole mounted on vehicles, vessels and buildings with the supplied hardware.
Key highlights
- 2×2 MIMO LTE/5G plus active GPS in one housing
- Covers 617–6000 MHz: LTE B1–B86 and 5G n1–n99
- Up to 6.1 dBi cellular peak gain
- Active GPS with 28 dB LNA
- IP68 rated, UV-stable radome
- No ground plane required
- Wind survival up to 220 km/h
- Panel, wall or pole mounting
Recommended for
- Fleet & transport — Roof-mount cellular and GPS for buses, emergency vehicles and service vans with a single 5G modem.
- Fleet tracking — The active GPS element feeds router-based location reporting and InControl tracking.
- Fixed sites — Wall or pole mount to lift the cellular signal out of a cabinet or plant room.
- Marine — IP68 and salt-spray-tested build for small vessels and pontoons.
Performance
Antenna performance
Two wideband cellular elements provide 2×2 MIMO from 617 MHz to 6 GHz, with the strongest gain in the mid and C-band ranges used by 5G.
Elements
| Cellular | 2x LTE/5G |
| GPS | 1x (active) |
Cellular RF
| Frequency | 617–6000 MHz |
| Bands | LTE bands B1 to B86 (except B31, B72, B73, B87, B88), 5G bands n1 to n99 |
| Peak gain | 1.0 dBi (617–960 MHz), 5.6 dBi (1710–2700 MHz), 6.1 dBi (3400–4200 MHz), 5.3 dBi (4900–6000 MHz) |
| VSWR | < 2.5 over 85% of the band |
| Polarisation | Linear |
| Impedance | 50 Ω |
| Feed power handling | 10 W |
GPS
| Frequency | 1561–1602 MHz |
| Peak gain | 0.5 dBi @ 1575 MHz, 1.6 dBi @ 1602 MHz |
| LNA gain | 28 ±3 dB |
| Noise figure | 1.5 dB max at 3.3 V |
| Operating voltage | 3.3 V |
Features
Cellular
- 2×2 MIMO LTE/5G
- LTE B1–B86, 5G n1–n99
- Ground plane not required
GPS
- Active GPS element
- 28 dB LNA gain
- 1561–1602 MHz
Build
- IP68 rated
- UV-stable radome
- 220 km/h wind survival
- Salt spray tested to MIL-STD 810F
Certifications
Hardware
Physical
| Height | 36 mm (spigot not included) |
| Diameter | 130 mm |
| Radome | UV-stable PC |
| Colour | White |
Cabling
| Connector | QMA |
| Cable length | 1 ft / 0.3 m |
| Cellular cable | CFD-200 |
| GPS cable | RG-174 |
Environmental
| Ingress protection | IP68 |
| Operating temperature | -40°C to 80°C |
| Storage temperature | -40°C to 80°C |
| Wind survival | 220 km/h |
| Salt spray | MIL-STD 810F |
Mounting
| Mounting | Panel, wall or pole |
| Mounting hole | 43 mm |
| Max panel thickness | 15 mm |
Package Content
Mobility 20G antenna, wall/pole mount, 3M adhesive pad
Documentation
Downloads & resources
Download the Peplink Mobility 20G datasheet covering full specifications and ordering codes.
