Overview
Overview
Maritime 20G combines two wideband cellular elements and an active GPS antenna in a single slim, 483.5 mm tall radome. Coverage runs from 410 MHz to 6000 MHz, spanning LTE and 5G bands and the 2.4 and 5 GHz Wi-Fi ranges, with up to 6.8 dBi peak gain.
Each unit ships with integrated 2 m cables: low-loss CFD-200 for the cellular elements and RG-174 for GPS. The UV-stable housing is IP68 rated, salt-spray tested and mounts on a standard 1 inch 14 TPI marine thread or a pole or wall using the supplied L-shape mount.
Key highlights
- 2×2 MIMO 5G-ready cellular antenna
- Integrated GPS receiver with 28 dB LNA
- 410–6000 MHz, including 2.4 & 5 GHz Wi-Fi bands
- Up to 6.8 dBi peak gain
- 2 m (6.5 ft) integrated cables, SMA male connectors
- IP68, UV-stable PC radome
- Salt spray tested to MIL-STD 810F / ASTM B117
- 100 mph / 160 km/h wind survivability
Recommended for
- Leisure & workboats — 2×2 MIMO 5G plus GPS for single-modem routers on board.
- Fleet & vessel tracking — Built-in GPS feeds location to the router for tracking and geo-fencing.
- Coastal installations — IP68 and salt-spray tested for exposed waterfront sites.
- Dual-modem setups — Pair two units for 4 cellular paths on a dual-modem router.
Performance
Antenna performance
Two linear-polarised cellular elements cover 410–6000 MHz with up to 6.8 dBi gain, alongside an active GPS antenna with a 28 dB LNA.
Elements
| Cellular | 2x LTE/5G |
| GPS | 1x |
| Configuration | 2×2 MIMO |
Cellular RF
| Frequency | 410–6000 MHz |
| Gain 410–470 MHz | 3.2 dBi |
| Gain 617–960 MHz | 5.4 dBi |
| Gain 1710–2700 MHz | 4.9 dBi |
| Gain 3400–4200 MHz | 6.2 dBi |
| Gain 4900–6000 MHz | 6.8 dBi |
| VSWR | <2.5 (410–470, 1710–6000 MHz); <3.0 (617–960 MHz) |
| Polarisation | Linear |
| Impedance | 50 Ω |
| Max feed power | 10 W |
GPS
| Frequency | 1561–1602 MHz |
| Peak gain | 0.5 dBi @ 1575 MHz; 1.6 dBi @ 1602 MHz |
| LNA gain | 28 ±3 dB |
| VSWR | <2.5 |
Features
Marine build
- IP68 rated
- UV-stable PC housing
- Salt spray: MIL-STD 810F / ASTM B117
- Wind survivability 100 mph / 160 km/h
Installation
- Standard maritime 1 inch 14 TPI thread
- Pole (25–50 mm / 1–2 in) and wall mounting
- Integrated 2 m cables with SMA male connectors
Certifications
Hardware
Physical
| Dimensions | 96 mm diameter x 483.5 mm height (3.78 x 19.04 in) |
| Housing | UV-stable PC |
| Colour | White |
Cabling
| Connector | SMA male |
| Cable length | 6.5 ft / 2 m |
| Cellular cable | CFD-200 |
| GPS cable | RG-174 |
Environmental
| Ingress protection | IP68 |
| Operating temperature | -40 to 80°C (-40 to 176°F) |
| Storage temperature | -40 to 80°C (-40 to 176°F) |
| Wind survivability | 100 mph / 160 km/h |
| Salt spray | MIL-STD 810F / ASTM B117 |
Package Content
Maritime 20G antenna with SMA male connectors; L-shape mount set. SMA version also includes the maritime mount set (not included with the N-type version). The 1 inch 14 TPI male adapter (ACW-652) is not included.
Documentation
Downloads & resources
Download the Peplink Maritime 20G datasheet covering full specifications and ordering codes.
