Overview
Overview
Maritime 10G is the entry point to Peplink’s maritime antenna range: a single 5G-ready cellular element covering 617–960 MHz, 1710–2700 MHz and 3400–4200 MHz, with gain rising to 9.3 dBi in the 3.4–4.2 GHz band. It suits single-modem routers, a spare modem port, or a dedicated extra cellular path on board.
The antenna has no fixed cable. Instead it presents an N-type female connector at the base, letting installers choose the feeder type and length that suits the run from mast to router. The UV-stable polycarbonate radome is IP68 rated, salt-spray tested and survives winds of up to 100 mph.
Key highlights
- Single 5G-ready cellular element (1×1)
- 617–4200 MHz coverage
- Up to 9.3 dBi peak gain (3400–4200 MHz)
- N-type female connector, cable not included
- IP68, UV-stable PC radome
- Salt spray tested to MIL-STD 810F / ASTM B117
- 100 mph / 160 km/h wind survivability
- Standard 1 inch 14 TPI marine thread plus L-shape mount
Recommended for
- Small vessels & tenders — A compact single-element 5G antenna for one-modem routers on board.
- Coastal & harbour sites — Salt-spray tested and IP68 rated for exposed waterfront installs.
- Long feeder runs — N-type termination lets you fit your own low-loss cable to the router.
- Adding a cellular path — Ideal for a single spare modem port or a dedicated extra SIM link.
Performance
Antenna performance
One linear-polarised cellular element with gain that increases across the band, peaking at 9.3 dBi in the 3.4–4.2 GHz 5G range.
Elements
| Cellular | 1x LTE/5G |
| GPS | Not included |
| Configuration | 1×1 |
RF
| Frequency | 617–960 / 1710–2700 / 3400–4200 MHz |
| Gain 617–960 MHz | 2.8 dBi |
| Gain 1710–2700 MHz | 8.2 dBi |
| Gain 3400–4200 MHz | 9.3 dBi |
| VSWR | <2.8 (617–960 MHz); <2.1 (1710–4200 MHz) |
| Polarisation | Linear |
| Impedance | 50 Ω |
| Max feed power | 10 W |
Features
Marine build
- IP68 rated
- UV-stable PC housing
- Salt spray: MIL-STD 810F / ASTM B117
- Wind survivability 100 mph / 160 km/h
Installation
- Standard maritime 1 inch 14 TPI thread
- L-shape mount set for pole or wall
- N-type female connector for custom feeder
Certifications
Hardware
Physical
| Dimensions | 96 mm diameter x 483.5 mm height (3.78 x 19.04 in) |
| Housing | UV-stable PC |
| Colour | White |
Cabling
| Connector | N-type female |
| Cable | Not included (N-type female at base) |
Environmental
| Ingress protection | IP68 |
| Operating temperature | -40 to 80°C (-40 to 176°F) |
| Storage temperature | -40 to 80°C (-40 to 176°F) |
| Wind survivability | 100 mph / 160 km/h |
| Salt spray | MIL-STD 810F / ASTM B117 |
Package Content
Maritime 10G antenna, maritime mount set (1 inch 14 TPI), L-shape mount set.
Documentation
Downloads & resources
Download the Peplink Maritime 10G datasheet covering full specifications and ordering codes.
