Overview
Overview
The SD-PMU brings Peplink’s PowerFusion technology to onboard power distribution. Two terminal block inputs feed a DC-DC converter that supplies four 52V terminal block outputs, rated at up to 200W per port.
In InControl 2 you can monitor voltage, wattage, temperature and current on each port, reboot connected devices remotely and configure custom boot-up sequences, with battery protection for vehicle and marine installations.
Key highlights
- PowerFusion enabled
- 2x terminal block inputs
- 4x terminal block outputs
- 52V output, up to 200W per port
- Per-port monitoring in InControl 2
- Remote reboot and custom boot sequences
- Voltage monitoring and battery protection
Recommended for
- Marine deployments — Consistent 52V supply to onboard network kit
- Transport fleets — Sequential boot-up and battery protection
- Remote troubleshooting — Reboot devices through the cloud
Performance
Power output
Two inputs feed a DC-DC converter supplying four regulated 52V outputs.
52VOutput
200WPer port max
4Outputs
Power
| Inputs | 2x terminal block |
| Outputs | 4x terminal block |
| Output voltage | 52V |
| Max per port | 200W |
Features
InControl 2
- Per-port voltage, wattage, current and temperature
- Remote device reboot
- Custom boot-up sequences
Protection
- Voltage monitoring
- Battery protection
Hardware
Specifications
| Inputs | 2x terminal block |
| Outputs | 4x terminal block |
| Output voltage | 52V |
| Max output per port | 200W |
| Converter | DC-DC |
| Management | InControl 2 (PowerFusion) |
Documentation
Downloads & resources
Download the Peplink Software-Defined Power Management Unit datasheet for full specifications and details.
