Overview
Overview
The SIM Injector Mini holds up to eight Nano-SIM cards and delivers them to a compatible Peplink router over Ethernet, so SIMs can be activated and switched remotely rather than swapped by hand. It suits installations where the router is hard to reach.
It can be powered over the same Ethernet cable using 802.3at PoE, or from a DC power supply, and is built for a wide -40 to 65°C operating range.
Key highlights
- 8 active Nano-SIM (4FF) slots
- Remote SIM management through a compatible Peplink router
- Single 10/100 Ethernet port with 802.3at PoE input
- Alternative 10-30V DC power input
- -40 to 65°C operating temperature
- Compact 100 x 107 x 35 mm housing
Recommended for
- Hard-to-reach installations — Swap SIMs remotely without a site visit
- Multi-carrier resilience — Keep several carrier SIMs ready for a compatible router
- Roaming and travel — Hold SIMs for different regions
Features
Compatibility
- Balance 20X, 380X, 580X (with FlexModule Mini)
- SDX, SDX Pro, EPX (with compatible FlexModule Plus with 4FF Nano-SIM slots)
In use
- Connect to the router with a single Ethernet cable
- Power by 802.3at PoE or the supplied 12V power supply
Hardware
Specifications
| SIM slots | 8x Nano-SIM (4FF) |
| Ethernet | 1x 10/100, 802.3at PoE input |
| Power input | 10-30V DC or 802.3at PoE |
| Dimensions | 100 x 107 x 35 mm (3.9 x 4.2 x 1.4 in) |
| Weight | 244 g |
| Operating temperature | -40 to 65°C |
| Humidity | 15% to 95% non-condensing |
Package Content
1x SIM Injector Mini, 1x 12V 2A power supply
Documentation
Downloads & resources
Download the Peplink Sim Injector Mini datasheet for full specifications and details.
